D-Link DGS-1510 User Manual - Page 399

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Language Management This window is used to install the language file to the Switch. To view the following window, click Tools > Language Management, as shown below: Figure 13-18 Language Management Window The fields that can be configured are described below: Parameter Language File Description Click the Browse button to navigate to the location of the firmware file located on the local PC. Click the Apply button to initiate the language pack installation. Reset This window is used to reset the Switch's configuration to the factory default settings. To view the following window, click Tools > Reset, as shown below: Figure 13-19 Reset Window Select one of the following options: • The Switch will be reset to its factory defaults including IP address and stacking information, and the will save, reboot. - To reset the Switch's configuration to its factory default settings. • The Switch will be reset to its factory default except IP address, and then will save, reboot - To reset the Switch's configuration to its factory default settings. This option will exclude the IP address from being changed. • The Switch will be reset to its factory defaults including IP address - To reset the Switch's configuration to its factory default settings. Click the Apply button to initiate the factory default reset and reboot the Switch. 388