D-Link DGS-1510 User Manual - Page 240
Action, Permit, Protocol Type, dynamic, Fragments, Source, Prefix Length, Destination, Flow Label
![]() |
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 240 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Action Description Select the action that this rule will take here. Options to choose from are Permit and Deny. After selecting the None option as the Protocol Type, the following section will appear. Figure 8-16 ACL Configuration Wizard (Add Rule for IPv6 ACL) None Window The dynamic fields that can be configured are described below: Parameter Fragments Source Destination DSCP Flow Label Description Select the Fragments option to include packet fragment filtering. Select and enter the source information here. Options to choose from are: • Any - Any source traffic will be evaluated according to the conditions of this rule. • Host - Enter the source host's IPv6 address here. • IPv6 - The Prefix Length option will also be available. Enter the source IPv6 address and prefix length value in the spaces provided. Select and enter the destination information here. Options to choose from are: • Any - Any destination traffic will be evaluated according to the conditions of this rule. • Host - Enter the destination host's IPv6 address here. • IPv6 - The Prefix Length option will also be available. Enter the destination IPv6 address and prefix length value in the spaces provided. Select or enter the DSCP value used here. This value must be between 0 and 63. Enter the flow label value here. This value must be between 0 and 1048575. 229
![](/manual_guide/products/dlink-dgs1510-user-manual-acdf2fb/240.png)