D-Link DGS-1510 User Manual - Page 95

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide NTP Peer Settings This window is used to view and configure the NTP peer settings. To view the following window, click Management > NTP > NTP Peer Settings, as shown below: Figure 4-62 NTP Peer Settings Window The fields that can be configured are described below: Parameter IP Address IPv6 Address Version Key ID Min Poll Max Poll Prefer Description Select and enter the NTP peer's IPv4 address here. Select and enter the NTP peer's IPv6 address here. Enter the NTP peer's version number here. This value must be between 1 and 4. Enter the authentication key ID here. This ID must be between 1 and 255. Enter the minimum poll intervals for NTP messages here. This value must be between 3 and 16 seconds. Enter the maximum poll intervals for NTP messages here. This value must be between 4 and 17 seconds. Select whether this peer is the preferred peer in the list or not. Options to choose from are True and False. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. 84