D-Link DGS-1510 User Manual - Page 390
Firmware Backup to TFTP, Tools > Firmware Upgrade & Backup > Firmware Backup to, Source File
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 390 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to HTTP, as shown below: Figure 13-4 Firmware Backup to HTTP Window The fields that can be configured are described below: Parameter Unit Source File Description Select the switch unit that will be used for this configuration here. Enter the source filename and path of the firmware file located on the Switch here. This field can be up to 64 characters long. Click the Backup button to initiate the firmware backup. Wait for the Web browser to prompt where to save the file on the local PC. Firmware Backup to TFTP This window is used to initiate a firmware backup to a TFTP server. To view the following window, click Tools > Firmware Upgrade & Backup > Firmware Backup to TFTP, as shown below: Figure 13-5 Firmware Backup to TFTP Window The fields that can be configured are described below: Parameter Unit TFTP Server IP Source File Destination File Description Select the switch unit that will be used for this configuration here. Enter the TFTP server's IP address here. When the IPv4 option is selected, enter the IPv4 address of the TFTP server in the space provided. When the IPv6 option is selected, enter the IPv6 address of the TFTP server in the space provided. Enter the source filename and path of the firmware file located on the Switch here. This field can be up to 64 characters long. Enter the destination filename and path where the firmware should be stored on the TFTP server. This field can be up to 64 characters long. Click the Backup button to initiate the firmware backup. 379