D-Link DGS-1510 User Manual - Page 354

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide The fields that can be configured for CPU Protect Sub-Interface are described below: Parameter Sub-Interface Rate Limit Description Select the sub-interface option here. Options to choose from are Manage, Protocol, and Route. Enter the rate limit value used here. This value must be between 0 and 1024 packets per second. Tick the No Limit option to disable the rate limit. Click the Apply button to accept the changes made. The fields that can be configured for Sub-Interface Information are described below: Parameter Sub-Interface Description Select the sub-interface option here. Options to choose from are Manage, Protocol, and Route. Click the Find button to locate a specific entry based on the information entered. CPU Protect Type This window is used to view and configure the CPU protection type settings. To view the following window, click Security > Safeguard Engine > CPU Protect Type, as shown below: Figure 9-82 CPU Protect Type Window The fields that can be configured for CPU Protect Type are described below: Parameter Protocol Name Rate Limit Description Select the protocol name option here. Options to choose from are DHCP, ARP, DNS, GVRP, ICMPv4, ICMPv6-Neighbor, ICMPv6Other, IGMP, LACP, SNMP, SSH, STP, Telnet, TFTP, Web, and 802.1X. Enter the rate limit value used here. This value must be between 0 and 1024 packets per second. Tick the No Limit option to disable the rate limit. Click the Apply button to accept the changes made. The fields that can be configured for Protect Type Information are described below: Parameter Protocol Name Description Select the protocol name option here. Options to choose from are DHCP, ARP, DNS, GVRP, ICMPv4, ICMPv6-Neighbor, ICMPv6- 343