D-Link DGS-1510 User Manual - Page 391

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Configuration Restore & Backup Configuration Restore from HTTP This window is used to initiate a configuration restore from a local PC using HTTP. To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from HTTP, as shown below: Figure 13-6 Configuration Restore from HTTP Window The fields that can be configured are described below: Parameter Unit Source File Destination File Replace Description Select the switch unit that will be used for this configuration here. Enter the source filename and path of the configuration file located on the local PC. This field can be up to 64 characters long. Alternatively click the Browse button to navigate to the location of the configuration file located on the local PC. Enter the destination filename and path where the configuration file should be stored on the Switch. This field can be up to 64 characters long. Select the running-config option to restore and overwrite the running configuration file on the Switch. Select the startup-config option to restore and overwrite the startup configuration file on the Switch. Select this option to replace the current running configuration. Click the Restore button to initiate the configuration restore. Configuration Restore from TFTP This window is used to initiate a configuration restore from a TFTP server. To view the following window, click Tools > Configuration Restore & Backup > Configuration Restore from TFTP, as shown below: Figure 13-7 Configuration Restore from TFTP Window 380