D-Link DGS-1510 User Manual - Page 97
NTP Key Settings, Management > NTP > NTP Key Settings, NTP Control Key, Apply, NTP Request Key
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide NTP Key Settings This window is used to view and configure the NTP key settings. To view the following window, click Management > NTP > NTP Key Settings, as shown below: Figure 4-64 NTP Key Settings Window The fields that can be configured for NTP Control Key are described below: Parameter NTP Control Key Description Enter the NTP control key here. This key must be between 1 and 255. Select the None option not to use an NTP control key. Click the Apply button to accept the changes made. The fields that can be configured for NTP Request Key are described below: Parameter NTP Request Key Description Enter the NTP request key here. This key must be between 1 and 255. Select the None option not to use an NTP request key. Click the Apply button to accept the changes made. The fields that can be configured for NTP Key Settings are described below: Parameter Key ID MD5 Description Enter the NTP key number here. This authentication key number must be between 1 and 255. Enter the MD5 NTP key here. This key can be up to 32 characters long. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. 86