D-Link DGS-1510 User Manual - Page 14

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Logging onto the Web UI To access the Web UI, simply open a standard web browser on the management PC, and enter the Switch's default IP address into the address bar of the browser and press the Enter key. NOTE: The default IP address of this switch is 10.90.90.90, with a subnet mask of 255.0.0.0. Figure 2-1 IP address in Internet Explorer NOTE: By default, one user account is already configured on the Switch. Both the username and password for this account is admin. NOTE: After upgrading the firmware on the Switch and no user accounts were created, the default admin user account will automatically be created after rebooting the Switch with the new boot-up configuration file. NOTE: After upgrading the firmware on the Switch and user accounts were created, the default admin user account will not be created automatically. Only after a factory reset was performed on the Switch will the default admin user account be created. This will open the user authentication window, as seen below. Figure 2-2 User Authentication Window Enter the User Name and Password in the corresponding fields and click Login. This will open the Web UI. Management features available in the Web UI of the Switch are explained below. 3