D-Link DGS-1510 User Manual - Page 260
Action, Permit, Protocol Type, Protocol ID, dynamic, Source, Prefix Length, Destination, Source Port
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 260 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Action Protocol Type Description Select the action that this rule will take here. Options to choose from are Permit and Deny. Select the protocol type option here. Options to choose from are TCP, UDP, ICMP, Protocol ID, ESP, PCP, SCTP, and None. After selecting the TCP option as the Protocol Type, the following page and parameters will be available, as shown below: Figure 8-45 Extended IPv6 ACL (Add Rule) TCP Window The dynamic fields that can be configured are described below: Parameter Source Destination Source Port Description Select and enter the source information here. Options to choose from are: • Any - Any source traffic will be evaluated according to the conditions of this rule. • Host - Enter the source host's IPv6 address here. • IPv6 - The Prefix Length option will also be available. Enter the source IPv6 address and prefix length value in the spaces provided. Select and enter the destination information here. Options to choose from are: • Any - Any destination traffic will be evaluated according to the conditions of this rule. • Host - Enter the destination host's IPv6 address here. • IPv6 - The Prefix Length option will also be available. Enter the destination IPv6 address and prefix length value in the spaces provided. Select and enter the source port value here. Options to choose from are: • = - The specific selected port number will be used. 249