D-Link DGS-1510 User Manual - Page 365

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Service Policy Description Enter the service policy name here. This name can be up to 32 characters long. Click the Apply button to accept the changes made. The fields that can be configured for Import File are described below: Parameter File Select Destination File Name Description Select the file type that will be loaded here. Options to choose from are Certificate and Private Key. After selecting the file type, browse to the appropriate file, located on the local computer, by pressing the Browse button. Enter the destination file name used here. This name can be up to 32 characters long. Click the Apply button to accept the changes made. Click the Generate button in the SSL-Self-signed Certificate section to generate a new self-signed certificate, regardless if there is a built-in self-signed certificate or not. The certificate generated does not affect the user-downloaded certificates. NOTE: The SSL self-signed certificate only supports self-signature RSA certificates with a key length of 2048 bits. Crypto PKI Trustpoint This window is used to view and configure the crypto PKI trust point settings. To view the following window, click Security > SSL > Crypto PKI Trustpoint, as shown below: Figure 9-94 Crypto PKI Trustpoint Window The fields that can be configured are described below: Parameter Trustpoint File System Path Password Description Enter the name of the trust-point that is associated with the imported certificates and key pairs here. This name can be up to 32 characters long. Enter the file system path for certificates and key pairs here. Enter the encrypted password phrase that is used to undo encryption when the private keys are imported here. The password 354