D-Link DGS-1510 User Manual - Page 53
SNMP Linkchange Trap Settings, Management > SNMP > SNMP Linkchange Trap Settings
![]() |
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Port Link Up Port Link Down Coldstart Warmstart Description Tick this option to control the sending of port link up notifications. A linkup trap is generated when the device recognizes that one of the communication links has come up. Tick this option to control the sending of port link down notifications. A linkDown trap is generated when the device recognizes a failure in one of the communication links. Tick this option to control the sending of SNMP coldStart notifications. Tick this option to control the sending of SNMP warmStart notifications. Click the Apply button to accept the changes made. SNMP Linkchange Trap Settings This window is used to configure the SNMP Linkchange trap settings. To view the following window, click Management > SNMP > SNMP Linkchange Trap Settings, as shown below: Figure 4-7 SNMP Linkchange Trap Settings Window The fields that can be configured are described below: Parameter Unit From Port / To Port Trap Sending Trap State Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select this option to enable or disable the sending of the SNMP notification traps that is generated by the system. Select this option to enable or disable the SNMP link change trap. Click the Apply button to accept the changes made. 42
![](/manual_guide/products/dlink-dgs1510-user-manual-acdf2fb/53.png)