D-Link DGS-1510 User Manual - Page 423

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Destination File Replace Description Enter the destination filename and path where the configuration file should be stored on the Switch. This field can be up to 64 characters long. Select the running-config option to restore and overwrite the running configuration file on the Switch. Select the startup-config option to restore and overwrite the startup configuration file on the Switch. Select this option to replace the current running configuration. Click the Restore button to initiate the configuration restore. Configuration Backup to HTTP This window is used to initiate a configuration file backup to a local PC using HTTP. NOTE: The Source File (name and path) can be found in the File System window on page 403. To view the following window, click Tools > Configuration Restore & Backup > Configuration Backup to HTTP, as shown below: Figure 14-25 Configuration Backup to HTTP Window The fields that can be configured are described below: Parameter Unit Source File Description Select the switch unit that will be used for this configuration here. Enter the source filename and path of the configuration file located on the Switch here. This field can be up to 64 characters long. Select the running-config option to back up the running configuration file from the Switch. Select the startup-config option to back up the start-up configuration file from the Switch. Click the Backup button to initiate the configuration file backup. Wait for the Web browser to prompt where to save the file on the local PC. Language Management This window is used to install the language file to the Switch. To view the following window, click Tools > Language Management, as shown below: Figure 14-26 Language Management Window 412