D-Link DGS-1510 User Manual - Page 216
Set-DSCP-Transmit, Set-DSCP-1P, Transmit, Exceed Action, Violate Action, Color Aware, Apply, Delete
![]() |
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Exceed Action Violate Action Color Aware Description • Drop - Specifies that the packet will be dropped. • Set-DSCP-Transmit - Enter the IP DSCP value in the space provided. This value sets the IP Differentiated Services Code Point (DSCP) value and transmits the packet with the new IP DSCP value. • Set-1P-Transmit - Enter the 1P transmit value in the space provided. This value sets the IEEE 802.1p value and transmits the packet with the new value. • Set-DSCP-1P - Enter the IP DSCP and 1P transmit values in the spaces provided. • Transmit - Specifies that packets will be transmitted unaltered. Select the exceed action here. The exceed action specifies the action to take on packets that exceed the rate limit. For a two rate policer, if the exceed action is not specified, the default action is Drop. Options to choose from are: • Drop - Specifies that the packet will be dropped. • Set-DSCP-Transmit - Enter the IP DSCP value in the space provided. This value sets the IP DSCP value and transmits the packet with the new IP DSCP value. • Set-1P-Transmit - Enter the 1P transmit value in the space provided. This value sets the IEEE 802.1p value and transmits the packet with the new value. • Set-DSCP-1P - Enter the IP DSCP and 1P transmit values in the spaces provided. • Transmit - Specifies that packets will be transmitted unaltered. Select the violate action here. The violate action specifies the action to take on packets that violate the normal and maximum burst sizes for singe rate policing. It specifies the action to take for those packets that did not conform to both CIR and PIR. For a single rate policer, if the violate action is not specified, it will create a single-rate two-color policer. For a two-rate policer, if the violation action is not specified, the default action is equal to the exceed action. Options to choose from are: • Drop - Specifies that the packet will be dropped. • Set-DSCP-Transmit - Enter the IP DSCP value in the space provided. This value sets the IP DSCP value and transmits the packet with the new IP DSCP value. • Set-1P-Transmit - Enter the 1P transmit value in the space provided. This value sets the IEEE 802.1p value and transmits the packet with the new value. • Set-DSCP-1P - Enter the IP DSCP and 1P transmit values in the spaces provided. • Transmit - Specifies that packets will be transmitted unaltered. Select this option to enable or disable color aware option here. When color aware is not specified, the policer works in the colorblind mode. When color aware is enabled, the policer works in the color aware mode. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. 205
![](/manual_guide/products/dlink-dgs1510-user-manual-acdf2fb/216.png)