D-Link DGS-1510 User Manual - Page 207

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Port Rate Limiting This window is used to view and configure the port rate limiting settings. To view the following window, click QoS > Basic Settings > Port Rate Limiting, as shown below: Figure 7-5 Port Rate Limiting Window The fields that can be configured are described below: Parameter Unit From Port / To Port Direction Rate Limit Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select the direction option here. Options to choose from are: • Input - The rate limit for ingress packets is configured. • Output - The rate limit for egress packets is configured. Select and enter the rate limit value here. When Bandwidth is selected, enter the input/output bandwidth value used in the space provided. This value must be between 64 and 10000000 kbps. Also, enter the Burst Size value in the space provided. This value must be between 0 and 128000 kilobytes. When Percent is selected, enter the input/output bandwidth percentage value used in the space provided. This value must be between 1 and 100 percent (%). Also, enter the Burst Size value in the space provided. This value must be between 0 and 128000 kilobytes. Select the None option to remove the rate limit on the specified port(s). The specified limitation cannot exceed the maximum speed of the specified interface. For the ingress bandwidth limitation, the ingress can trigger a pause frame or a flow control frame when the received traffic exceeds the limitation. Click the Apply button to accept the changes made. 196