D-Link DGS-1510 User Manual - Page 424
Reset, Reboot System, Tools > Reboot System
![]() |
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 424 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Language File Description Click the Browse button to navigate to the location of the firmware file located on the local PC. Click the Apply button to initiate the language pack installation. Reset This window is used to reset the Switch's configuration to the factory default settings. To view the following window, click Tools > Reset, as shown below: Figure 14-27 Reset Window Select one of the following options: • The Switch will be reset to its factory defaults including IP address and stacking information, and the will save, reboot. - To reset the Switch's configuration to its factory default settings. • The Switch will be reset to its factory default except IP address, and then will save, reboot - To reset the Switch's configuration to its factory default settings. This option will exclude the IP address from being changed. • The Switch will be reset to its factory defaults including IP address - To reset the Switch's configuration to its factory default settings. Click the Apply button to initiate the factory default reset and reboot the Switch. Reboot System This window is used to reboot the Switch and alternatively save the configuration before doing so. To view the following window, click Tools > Reboot System, as shown below: Figure 14-28 Reboot System Window When rebooting the Switch, any configuration changes that was made during this session, will be lost unless the Yes option is selected when asked to save the settings. Click the Reboot button to alternatively save the settings and reboot the Switch. 413
![](/manual_guide/products/dlink-dgs1510-user-manual-acdf2fb/424.png)