D-Link DGS-1510 User Manual - Page 45
Time Range, System > Time Range
![]() |
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide The fields that can be configured for SNTP Global Settings are described below: Parameter SNTP State Poll Interval Description Select this option to enable or disable SNTP. Enter the synchronizing interval in seconds. The value is from 30 to 99999 seconds. The default interval is 720 seconds. Click the Apply button to accept the changes made. The fields that can be configured for SNTP Server Setting are described below: Parameter IPv4 Address IPv6 Address Description Enter the IP address of the SNTP server, which provides the clock synchronization. Enter the IPv6 address of the SNTP server, which provides the clock synchronization. Click the Add button to add the SNTP server. Click the Delete button to remove the specified entry. Time Range This window is used to view and configure the time range settings. To view the following window, click System > Time Range, as shown below: Figure 3-27 Time Range Window The fields that can be configured are described below: Parameter Range Name From Week / To Week From Time / To Time Description Enter the name of the time range. This name can be up to 32 characters long. Select the starting and ending days of the week that will be used for this time range. Tick the Daily option to use this time range for every day of the week. Tick the End Week Day option to use this time range from the starting day of the week until the end of the week, which is Sunday. Select the starting and ending time of the day that will be used for this time range. The first drop-down menu selects the hour and the second drop-down menu selects the minute. Click the Apply button to accept the changes made. 34
![](/manual_guide/products/dlink-dgs1510-user-manual-acdf2fb/45.png)