D-Link DGS-1510 User Manual - Page 276
VLAN Range
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 276 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Destination MAC Address Source Port Destination Port IP Precedence ToS DSCP VID VLAN Range CoS Time Range Description Select and enter the destination information here. Options to choose from are: • Any - Any destination traffic will be evaluated according to the conditions of this rule. • Host - Enter the destination host's MAC address here. • MAC - The Wildcard option will also be available. Enter the destination MAC address and wildcard value in the spaces provided. Select and enter the source port value here. Options to choose from are: • = - The specific selected port number will be used. • > - All ports greater than the selected port, will be used. • < - All ports smaller than the selected port, will be used. • ≠ - All ports, excluding the selected port, will be used. • Range - The start port number and end port number selected, of the range, will be used. Alternatively, the port number(s) can manually be entered in the space(s) provided, if the port number(s) is/are not available in the drop-down list. Select and enter the destination port value here. Options to choose from are: • = - The specific selected port number will be used. • > - All ports greater than the selected port, will be used. • < - All ports smaller than the selected port, will be used. • ≠ - All ports, excluding the selected port, will be used. • Range - The start port number and end port number selected, of the range, will be used. Alternatively, the port number(s) can manually be entered in the space(s) provided, if the port number(s) is/are not available in the drop-down list. Select the IP precedence value used here. Options to choose from are 0 (routine), 1 (priority), 2, (immediate), 3 (flash), 4 (flashoverride), 5 (critical), 6 (internet), and 7 (network). After selecting the IP precedence value, select the Type-of-Service (ToS) value that will be used here. Options to choose from are 0 (normal), 1 (min-monetary-cost), 2 (max-reliability), 3, 4 (maxthroughput), 5, 6, 7, 8 (min-delay), 9, 10, 11, 12, 13, 14, and 15. Select or enter the DSCP value used here. This value must be between 0 and 63. Enter the VLAN ID that will be associated with this ACL rule here. This value must be between 1 and 4094. Enter the VLAN range here. Enter the minimum and maximum VLAN ID in the range here. Select the Class of Service (CoS) value here. Options to choose from are from 0 to 7. Enter the name of the time range to associate with this ACL rule. 265