D-Link DGS-1510 User Manual - Page 178

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Action Address Description Select the action that will be taken here. Options to choose from are Remove and Add. Enter the IP address that will be sent. Click the Apply button to accept the changes made. NOTE: The IPv4 or IPv6 address entered here should be an existing LLDP management IP address. LLDP Management Address List This window is used to view the LLDP management address list. To view the following window, click L2 Features > LLDP > LLDP Management Address List, as shown below: Figure 5-74 LLDP Management Address List Window The fields that can be configured are described below: Parameter All/IPv4/IPv6 Description Select the subtype. Options to choose from are All, IPv4, and IPv6. Click the Find button to locate a specific entry based on the information entered. LLDP Basic TLVs Settings Type-length-value (TLV) allows the specific sending information as a TLV element within LLDP packets. This window is used to enable the settings for the Basic TLVs Settings. An active LLDP port on the Switch always included mandatory data in its outbound advertisements. There are four optional data types that can be configured for an individual port or group of ports to exclude one or more of these data types from outbound LLDP advertisements. The mandatory data type includes four basic types of information (end of LLDPDU TLV, chassis ID TLV, port ID TLV, and Time to Live TLV). The 167