D-Link DGS-1510 User Manual - Page 308
TACACS+, TACACS+ Global Settings
![]() |
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 308 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide The fields that can be configured are described below: Parameter Group Server Name Description Select the RADIUS group server name from this list here. Click the Clear button to clear the information based on the selections made. Click the Clear All button to clear all the information in this table. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. TACACS+ TACACS+ Global Settings This window is used to display and configure the global TACACS+ server settings. To view the following window, click Security > TACACS+ > TACACS+ Global Settings, as shown below: Figure 9-33 TACACS+ Global Settings Window The fields that can be configured in TACACS+ Global IPv4 Source Interface are described below: Parameter IPv4 TACACS+ Source Interface State IPv4 TACACS+ Source Interface Type Interface ID Description Select to enable or disable the state of the IPv4 TACACS+ source interface here. Select the IPv4 TACACS+ source interface type here. Options to choose from are: • VLAN - Specifies the IPv4 TACACS+ source interface type as VLAN. Enter the VLAN interface ID here. The range is from 1 to 4094. Click the Apply button to accept the changes made. The fields that can be configured in TACACS+ Global IPv6 Source Interface are described below: Parameter IPv6 TACACS+ Source Interface State IPv6 TACACS+ Source Interface Type Interface ID Description Select to enable or disable the state of the IPv6 TACACS+ source interface here. Select the IPv6 TACACS+ source interface type here. Options to choose from are: • VLAN - Specifies the IPv6 TACACS+ source interface type as VLAN. Enter the VLAN interface ID here. The range is from 1 to 4094. 297
![](/manual_guide/products/dlink-dgs1510-user-manual-acdf2fb/308.png)