D-Link DGS-1510 User Manual - Page 333

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter State Server IP Profile Name Description Select to enable or disable the DHCP server screening function on the port(s) specified. Enter the DHCP server's IP address here. Enter the DHCP server screening profile that will be used for the port(s) specified here. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. ARP Spoofing Prevention This window is used to view and configure the ARP spoofing prevention settings. When an entry is created, ARP packets whose sender IP address matches the gateway IP address, of an entry, but its sender MAC address field does not match the gateway MAC address, of the entry, will be dropped by the system. The ASP will bypass the ARP packets whose sender IP address doesn't match the configured gateway IP address. If an ARP address matches a configured gateway's IP address, MAC address, and port list, then bypass the Dynamic ARP Inspection (DAI) check no matter if the receiving port is ARP trusted or untrusted. To view the following window, click Security > ARP Spoofing Prevention, as shown below: Figure 9-63 ARP Spoofing Prevention Window The fields that can be configured for ARP Spoofing Prevention Logging State are described below: Parameter ARP Spoofing Prevention Logging State Description Select to enable or disable the ARP spoofing logging state here. Click the Apply button to accept the changes made. The fields that can be configured for ARP Spoofing Prevention are described below: Parameter Unit From Port / To Port Gateway IP Gateway MAC Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Enter the gateway's IP address used here. Enter the gateway's MAC address used here. 322