D-Link DGS-1510 User Manual - Page 348

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Authorization State Description If a station is allowed to move, there are two situations. It may need to be re-authenticated or directly moved to the new port without reauthentication based on the following rule. If the new port has the same authentication configuration as the original port, then reauthentication is not needed. The host will inherit the same authorization attributes with new port. The authenticated host can do roaming from port 1 to port 2, and inherit the authorization attributes without re-authentication. If the new port has the different authentication configuration as the original port, then reauthentication is needed. The authenticated host on port 1 can move and re-authenticated by port 2. If the new port has no authentication method enabled, then the station is directly moved to the new port. The session with the original port is removed. The authenticated host on port 1 can be moved to port 2. If this feature is disabled and an authenticated host moves to another port, then this is treated as a violation error. Select to enable or disable the authorized state here. The option is used to enable or disable the acceptance of an authorized configuration. When authorization is enabled for authentication, the authorized attributes (for example VLAN, 802.1p default priority, bandwidth, and ACL) assigned by the RADIUS server will be accepted if the authorization status is enabled. Bandwidth and ACL are assigned on a per-port basis. If in the multi-authenticated mode, VLAN and 802.1p are assigned on a per-host basis. Otherwise, Bandwidth and ACL are assigned on a per-port basis. Click the Apply button to accept the changes made. The fields that can be configured for User Information are described below: Parameter User Name VID Password Type Password Description Enter the user name used here. This name can be up to 32 characters long. Enter the VLAN ID used here. Select the password type option here. Options to choose from are Plain Text and Encrypted. Enter the password used here. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. 337