D-Link DGS-1510 User Manual - Page 256

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide After selecting the ACL profile and clicking the Add Rule button, users can configure the new ACL rule, in the selected ACL profile, as shown below: Figure 8-38 Standard IPv6 ACL (Add Rule) Window The fields that can be configured are described below: Parameter Sequence No. Action Source Destination Time Range Description Enter the ACL rule number here. This value must be between 1 and 65535. If this value is not specified, the system will automatically generate an ACL rule number for this entry. Select the action that this rule will take here. Options to choose from are Permit and Deny. Select and enter the source information here. Options to choose from are: • Any - Any source traffic will be evaluated according to the conditions of this rule. • Host - Enter the source host's IPv6 address here. • IPv6 - The Prefix Length option will also be available. Enter the source IPv6 address and prefix length value in the spaces provided. Select and enter the destination information here. Options to choose from are: • Any - Any destination traffic will be evaluated according to the conditions of this rule. • Host - Enter the destination host's IPv6 address here. • IPv6 - The Prefix Length option will also be available. Enter the destination IPv6 address and prefix length value in the spaces provided. Enter the name of the time range to associate with this ACL rule. Click the Back button to discard the changes made and return to the previous page. Click the Apply button to accept the changes made. 245