D-Link DGS-1510 User Manual - Page 88

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide DHCP Local Relay VLAN This window is used to configure local relay on a VLAN or a group of VLANs. To view the following window, click Management > DHCP > DHCP Relay > DHCP Local Relay VLAN, as shown below: Figure 4-53 DHCP Local Relay VLAN Window The fields that can be configured are described below: Parameter DHCP Local Relay VID List State Description Enter the VLAN ID for DHCP local relay. Tick the All VLANs check box to select all VLANs. Select this option to enable or disable the DHCP local relay on the specific VLAN(s). Click the Apply button to accept the changes made. DHCPv6 Relay DHCPv6 Relay Global Settings This window is used to configure the DHCPv6 relay remote ID. To view the following window, click Management > DHCP > DHCPv6 Relay > DHCPv6 Relay Global Settings, as shown below: Figure 4-54 DHCPv6 Relay Global Settings Window The fields that can be configured are described below: Parameter IPv6 DHCP Relay Remote ID Format IPv6 DHCP Relay Remote ID UDF IPv6 DHCP Relay Remote ID Policy Description Select to choose the sub-type of the remote ID. Options to choose from are Default, CID With User Define, and User Define. Select to choose the User Define Field (UDF) for remote ID. Options to choose from are: • ASCII - Select to enter the ASCII string with a maximum of 128 characters in the text box. • HEX - Select to enter the hexadecimal string with a maximum of 256 characters in the text box. Select to choose Option 37 forwarding policy for the DHCPv6 relay agent. Options to choose from are: 77