D-Link DGS-1510 User Manual - Page 199

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Click the Edit button to configure the following parameters: Figure 6-17 IPv6 Interface (Detail, Neighbor Discover, Edit) Window The fields that can be configured are described below: Parameter Preferred Life Time Valid Life Time Link Flag Autoconfig Flag Description Enter the preferred lifetime value here. The range is from 0 to 4294967295 seconds. The default value is 604800 seconds (7 days). Enter the valid lifetime value here. The range is from 0 to 4294967295 seconds. The default value is 2592000 seconds (30 days). Select to enable or disable the on-link flag here. The default option is Enabled. Select to enable or disable the auto-configure flag here. The default option is Enabled. Click the Apply button to accept the changes made. After clicking the DHCPv6 Client tab, at the top of the page, the following page will be available. Figure 6-18 IPv6 Interface (Detail, DHCPv6 Client) Window Click the Restart button to restart DHCPv6 client on an interface. The fields that can be configured for DHCPv6 Client Settings are described below: Parameter Client State Description Select this option to enable or disable the DHCPv6 client state. Tick the Rapid Commit check box to proceed with two-message exchange for prefix delegation. Click the Apply button to accept the changes made. 188