D-Link DGS-1510 User Manual - Page 189

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Local Proxy ARP State Description Select to enable or disable the local proxy ARP state here. This local proxy ARP function allows the Switch to respond to the proxy ARP, if the source IP and destination IP are in the same interface. Click the Apply button to accept the changes made. Click the Edit button to re-configure the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. ARP Table This window is used to view and configure the ARP table settings. To view the following window, click L3 Features > ARP > ARP Table, as shown below: Figure 6-4 ARP Table Window The fields that can be configured are described below: Parameter Interface VLAN IP Address Mask Hardware Address Type Description Select and enter the interface's VLAN ID used here. This value must be between 1 and 4094. Select and enter the IP address to display here. After the IP Address option was selected, enter the mask address for the IP address here. Select and enter the MAC address to display here. Select the type option here. Options to choose from are All and Dynamic. Click the Find button to locate a specific entry based on the information entered. Click the Clear All button to clear all the information. Click the Clear button to clear the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. 178