D-Link DGS-1510 User Manual - Page 32
PoE Status, Show Detail, Disabled, Searching, Requesting, Delivering, Faulty
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide After clicking the Show Detail button, the following table will appear. Figure 3-12 PoE System (Show Detail) Window PoE Status This window is used to configure the description, and display the PoE status of each port. One of the following PoE port states will be displayed in the table: • Disabled • Searching (remote PD is not connected) • Requesting (remote PD is inserted but no power is provided yet) • Delivering (remote PD is inserted and power is provided) • Faulty (maintain power signature absent, PD short, overloading, power denied, thermal shutdown, startup failure, or classification failure) To view the following window, click System > PoE > PoE Status, as shown below: Figure 3-13 PoE Status Window The fields that can be configured are described below: Parameter Unit From Port / To Port Description Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Enter the text that describes the PD connected to a PoE interface. The maximum length is 32 characters. Click the Delete Description button to clear the setting in the corresponding Description field. Click the Apply button to accept the changes made. 21