D-Link DGS-1510 User Manual - Page 85

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide The fields that can be configured for DHCP Relay Information Option Format Type are described below: Parameter Unit From Port / To Port Format Type Value Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select the DHCP information circuit ID format. Options to choose from are Vendor3 and Expert UDF. Select the DHCP information circuit ID format typ. Options to choose from are Remote ID and Circuit ID. Enter the vendor-defined string. Click the Apply button to accept the changes made. DHCP Relay Information Profile Settings This window is used to display and configure the DHCP relay information profile settings. To view the following window, click Management > DHCP > DHCP Relay > DHCP Relay Information Profile Settings, as shown below: Figure 4-52 DHCP Relay Information Profile Settings Window The fields that can be configured in DHCP Relay Information Option MAC Format are described below: Parameter Case Delimiter Description Select the case that will be used here. Options to choose from are: • Lowercase - Specifies that when using the lowercase format, the Option 82 MAC address for the user-defined profile will be formatted as: aa-bb-cc-dd-ee-ff. • Uppercase - Specifies that when using the uppercase format, the Option 82 MAC address for the user-defined profile username will be formatted as: AA-BB-CC-DD-EE-FF. Select the delimiter that will be used here. Options to choose from are: • Hyphen - Specifies that the format will be AA-BB-CC-DD-EEFF. • Colon - Specifies that the format will be AA:BB:CC:DD:EE:FF. • Dot - Specifies that the format will be AA.BB.CC.DD.EE.FF. • None - Specifies that when not using any delimiter, the format will be AABBCCDDEEFF. 74