D-Link DGS-1510 User Manual - Page 127
VLAN Mode, Access, Hybrid, Trunk, Acceptable Frame, Tagged Only, Admit All, Ingress Checking, Clone
![]() |
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide After click the Edit button, the following window will appear. This is a dynamic window that will change when a different VLAN Mode was selected. When Access was selected as the VLAN Mode, the following page will appear. Figure 5-16 Configure VLAN Interface - Access Window The fields that can be configured are described below: Parameter VLAN Mode Acceptable Frame Ingress Checking VID Clone Unit From Port / To Port Description Select the VLAN mode option here. Options to choose from are Access, Hybrid, and Trunk. Select the acceptable frame behavior option here. Options to choose from are Tagged Only, Untagged Only, and Admit All. Select this option to enable or disable the ingress checking function. Enter the VLAN ID used for this configuration here. This value must be between 1 and 4094. Tick this option to apply the configuration to the specified ports. Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. When Hybrid was selected as the VLAN Mode, the following page will appear. Figure 5-17 Configure VLAN Interface - Hybrid Window The fields that can be configured are described below: Parameter VLAN Mode Description Select the VLAN mode option here. Options to choose from are Access, Hybrid, and Trunk. 116
![](/manual_guide/products/dlink-dgs1510-user-manual-acdf2fb/127.png)