D-Link DGS-1510 User Manual - Page 138

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Description by snooping RTSP, HTTP, and HTTPS packets between NVRs and IPCs. These packets cannot be snooped if the TCP/UDP port is not equal to the RTSP port number. Click the Apply button to accept the changes made. The fields that can be configured for Port Settings are described below: Parameter Unit From Port / To Port State Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select this option to enable or disable the state of the port. Click the Apply button to accept the changes made. MAC Settings and Surveillance Device This window is used to configure the user-defined surveillance device OUI and display the surveillance VLAN information. To view the following window, click L2 Features > VLAN > Auto Surveillance VLAN > MAC Settings and Surveillance Device, as shown below: Figure 5-31 User -defined MAC Settings Window The fields that can be configured are described below: Parameter Component Type Description MAC Address Mask Description Select the surveillance component type. Options to choose from are Video Management Server, VMS Client/Remote Viewer, Video Encoder, Network Storage, and Other IP Surveillance Device. Enter the description for the user-defined OUI with a maximum of 32 characters. Enter the OUI MAC address. Enter the OUI MAC address matching bitmask. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. 127