D-Link DGS-1510 User Manual - Page 237
Destination Port, Range, Flow Label, Time Range, Action, Permit, Protocol Type
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 237 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Destination Port DSCP Flow Label Time Range Action Description provided, if the port number(s) is/are not available in the drop-down list. Select and enter the destination port value here. Options to choose from are: • = - The specific selected port number will be used. • > - All ports greater than the selected port, will be used. • < - All ports smaller than the selected port, will be used. • ≠ - All ports, excluding the selected port, will be used. • Range - The start port number and end port number selected, of the range, will be used. Alternatively, the port number(s) can manually be entered in the space(s) provided, if the port number(s) is/are not available in the drop-down list. Select or enter the DSCP value used here. This value must be between 0 and 63. Enter the flow label value here. This value must be between 0 and 1048575. Enter the name of the time range to associate with this ACL rule. Select the action that this rule will take here. Options to choose from are Permit and Deny. After selecting the ICMP option as the Protocol Type, the following section will appear. Figure 8-14 ACL Configuration Wizard (Add Rule for IPv6 ACL) ICMP Window 226