D-Link DGS-1510 User Manual - Page 94
NTP Server Settings, Apply, Management > NTP > NTP Server Settings, IP Address, Version, Key ID
![]() |
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 94 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Click the Apply button to accept the changes made. NTP Server Settings This window is used to view and configure the NTP server's settings. To view the following window, click Management > NTP > NTP Server Settings, as shown below: Figure 4-61 NTP Server Settings Window The fields that can be configured are described below: Parameter IP Address IPv6 Address Version Key ID Min Poll Max Poll Prefer Description Select and enter the NTP server's IPv4 address here. Select and enter the NTP server's IPv6 address here. Enter the NTP server's version number here. This value must be between 1 and 4. Enter the authentication key ID here. This ID must be between 1 and 255. Enter the minimum poll intervals for NTP messages here. This value must be between 3 and 16 seconds. Enter the maximum poll intervals for NTP messages here. This value must be between 4 and 17 seconds. Select whether this server is the preferred server in the list or not. Options to choose from are True and False. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. 83
![](/manual_guide/products/dlink-dgs1510-user-manual-acdf2fb/94.png)