D-Link DGS-1510 User Manual - Page 118

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Multicast Static FDB This window is used to view and configure the multicast static FDB settings. To view the following window, click L2 Features > FDB > Static FDB > Multicast Static FDB, as shown below: Figure 5-2 Multicast Static FDB Window The fields that can be configured are described below: Parameter Unit From Port / To Port VID MAC Address Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Enter the VLAN ID of the VLAN the corresponding MAC address belongs to. Enter the static destination MAC address of the multicast packets. This must be a multicast MAC address. The destination MAC address should start with 01. For example, 01-00-00-00-00-02. Click the Apply button to accept the changes made. Click the Delete All button to remove all the entries. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. MAC Address Table Settings This window is used to view and configure the MAC address table's global settings. To view the following window, click L2 Features > FDB > MAC Address Table Settings, as shown below: Figure 5-3 MAC Address Table Settings (Global Settings) Window 107