D-Link DGS-1510 User Manual - Page 180

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide LLDP Dot1 TLVs Settings LLDP Dot1 TLVs are organizationally specific TLVs, which are defined in IEEE 802.1 and used to configure an individual port or group of ports to exclude one or more of the IEEE 802.1 organizational port VLAN ID TLV data types from outbound LLDP advertisements. To view the following window, click L2 Features > LLDP > LLDP Dot1 TLVs Settings, as shown below: Figure 5-76 LLDP Dot1 TLVs Settings Window The fields that can be configured are described below: Parameter Unit From Port / To Port Port VLAN Protocol VLAN VLAN Name Protocol Identity Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select this option to enable or disable the port VLAN ID TLV to send. The Port VLAN ID TLV is an optional fixed length TLV that allows a VLAN bridge port to advertise the port's VLAN identifier (PVID) that will be associated with untagged or priority tagged frames. Select this option to enable or disable Port and Protocol VLAN ID (PPVID) TLV to send, and enter the VLAN ID in PPVID TLV. Select this option to enable or disable the VLAN name TLV to send, and enter the ID of the VLAN in the VLAN name TLV. Select this option to enable or disable the Protocol Identity TLV to send, and the protocol name. Options for protocol name to choose from are None, EAPOL, LACP, GVRP, STP, and All. Click the Apply button to accept the changes made. 169