D-Link DGS-1510 User Manual - Page 397

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Trace Route The trace route page allows the user to trace a route between the Switch and a given host on the network. To view the following window, click Tools > Trace Route, as shown below: Figure 13-15 Trace Route Window The fields that can be configured for IPv4 Trace Route are described below: Parameter IPv4 Address Domain Name Max TTL Port Timeout Probe Times Description Select and enter the IPv4 address of the destination here. Select and enter the domain name of the destination here. Enter the Time-To-Live (TTL) value of the trace route request here. This is the maximum number of routers that a trace route packet can pass. The trace route option will cross while seeking the network path between two devices. The range for the TTL is 1 to 60 hops. Enter the port number here. The value range is from 1 to 65535. Enter the timeout period while waiting for a response from the remote device here. A value of 1 to 65535 seconds can be specified. The default is 5 seconds. Enter the probe time number here. The range is from 1 to 9. If unspecified, the default value is 1. The fields that can be configured for IPv6 Trace Route are described below: Parameter IPv6 Address Max TTL Port Timeout Description Select and enter the IPv6 address of the destination here. Enter the TTL value of the trace route request here. This is the maximum number of routers that a trace route packet can pass. The trace route option will cross while seeking the network path between two devices. The range for the TTL is 1 to 60 hops. Enter the port number here. The value range is from 1 to 65535. Enter the timeout period while waiting for a response from the remote device here. A value of 1 to 65535 seconds can be specified. The default is 5 seconds. 386