D-Link DGS-1510 User Manual - Page 155

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter MEL Profile Name RPL Port RPL Owner Activate Description Select the checkbox and enter the ring MEL value of the ERP instance here. This value must be between 0 and 7. The configured MEL value of all ring nodes that participate in the same ERP instance should be identical. Select the Specify radio button to configure this parameter as per normal. Select the None radio button to revert this parameter to the default setting. Select the checkbox and enter the G.8032 profile's name here that will be associated with this ERP instance. Multiple ERP instances can be associated with the same G.8032 profile. The instances associated with the same profile protect the same set of VLANs, or the VLANs protected by one instance are a subset of LANs protected by another instance. This name can be up to 32 characters long. Select the Specify radio button to configure this parameter as per normal. Select the None radio button to revert this parameter to the default setting. Select the checkbox and then select the RPL port option here. Options to choose from are Port0 and Port1. The option selected will be configured as the RPL port. Select the checkbox and then select whether this node is the RPL owner or neighbor. Options to choose from are Enabled and Disabled. Enabling this option will specify this RPL as an owner. Select the checkbox and then select whether or not to active this ERP instance. Options to choose from are Enabled and Disabled. Enabling this option will active this ERP instance. Click the Back button to discard the changes made and return to the previous window. Click the Apply button to accept the changes made. After click the Show Status button, the following window will appear. Figure 5-52 ERPS (Show Status) Window Click the Back button to return to the previous window. 144