D-Link DGS-1510 User Manual - Page 209

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Parameter Description guaranteed bandwidth of one CoS cannot be used across physical ports. When the Min Percent option is selected, enter the minimum bandwidth percentage value in the space provided. This value must be between 1 and 100 percent (%). Also, enter the maximum percentage value (Max Percent) in the space provided. This value must be between 1 and 100 percent (%). Click the Apply button to accept the changes made. Advanced Settings DSCP Mutation Map This window is used to view and configure the Differentiated Services Code Point (DSCP) mutation map settings. When a packet is received by an interface, based on a DSCP mutation map, the incoming DSCP can be mutated to another DSCP immediately before any QoS operations. The DSCP mutation is helpful to integrate domains with different DSCP assignments. The DSCP-CoS map and DSCP-color map will still be based on the packet's original DSCP. All the subsequent operations will base on the mutated DSCP. To view the following window, click QoS > Advanced Settings > DSCP Mutation Map, as shown below: Figure 7-7 DSCP Mutation Map Window The fields that can be configured are described below: Parameter Mutation Name Input DSCP List Output DSCP Description Enter the DSCP mutation map name here. This name can be up to 32 characters long. Enter the input DSCP list value here. This value must be between 0 and 63. Enter the output DSCP value here. This value must be between 0 and 63. Click the Apply button to accept the changes made. Click the Delete button to remove the specific entry. 198