D-Link DGS-1510 User Manual - Page 220

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide The fields that can be configured are described below: Parameter None Specify New Precedence New DSCP New CoS New CoS Queue Description Select this option to match nothing to this policy map. Select the option to match something to this policy map. Select a new precedence for the packet. This value must be between 0 and 7. Tick the IPv4 only to only mark IPv4 precedence. Setting the precedence will not affect the CoS queue selection. Select a new DSCP for the packet. This value must be between 0 and 63. Tick the IPv4 only to only mark IPv4 precedence. Setting DSCP will not affect the CoS queue selection. Select a new CoS value for the packet. This value must be between 0 and 7. Setting CoS will not affect the CoS queue selection. Select a new CoS queue for the packet. This value must be between 0 and 7. This overwrites the original CoS queue selection. Click the Apply button to accept the changes made. Click the Back button to return to the previous window. After clicking the Policer button, the following window will appear. Figure 7-19 Police Action Window The fields that can be configured are described below: Parameter None Specify Average Rate Normal Burst Size Maximum Burst Size Conform Action Description Select this option to match nothing to this policy map. Select the option to match something to this policy map. Enter the average rate in kilobits per second. Enter the normal burst size in kilobytes. Enter the maximum burst in kilobytes. Select the action to take on green color packets. Options to choose from are Drop, Set-DSCP-Transmit, Set-1P-Transmit, Transmit, and Set-DSCP-1P. 209