D-Link DGS-1510 User Manual - Page 201

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide The fields that can be configured are described below: Parameter IPv6 Address/Prefix Length Interface VLAN Next Hop IPv6 Address Backup State Description Enter the IPv6 address and prefix length for this route here. Tick the Default Route option to use the default route as the IPv6 address. Enter the interface's VLAN ID that will be associated with this route here. Enter the next hop IPv6 address here. Select the backup state option here. Options to choose from are: • Primary - The route is specified as the primary route to the destination. • Backup - The route is specified as the backup route to the destination. Click the Apply button to accept the changes made. IPv6 Route Table This window is used to view and configure the IPv6 route table. To view the following window, click L3 Features > IPv6 Route Table, as shown below: Figure 6-21 IPv6 Route Table Window The fields that can be configured are described below: Parameter IPv6 Address IPv6 Address/Prefix Length Interface VLAN Connected Database Hardware Summary Description Select and enter the IPv6 address to display here. Select and enter the IPv6 address and prefix length to display here. Select the Longer Prefixes option to display IPv6 routes with prefixes greater than and equal to the prefix length. Select and enter the interface's VLAN ID to display here. Select this option to display only connected routes. Select to view all the related entries in the routing database instead of just the best route. Select this option to display only hardware routes. Hardware routes are routes that have been written into the hardware chip. Display the brief information of the active routing entries. Click the Find button to locate a specific entry based on the information entered. 190