D-Link DGS-1510 User Manual - Page 72

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide a range of excluded addresses, administrators must specify the exact range of addresses previously configured. To view the following window, click Management > DHCP > DHCP Server > DHCP Server Exclude Address, as shown below: Figure 4-32 DHCP Server Exclude Address Window The fields that can be configured are described below: Parameter Begin Address End Address Description Enter the first IPv4 address of a range of addresses to be excluded here. Enter the last IPv4 address of a range of addresses to be excluded here. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. DHCP Server Manual Binding This window is used to display and configure the DHCP server manual binding settings. With a manual binding entry, the IP address can be bound with a client-identifier or bound with the hardware address of the host. To view the following window, click Management > DHCP > DHCP Server > DHCP Server Manual Binding, as shown below: Figure 4-33 DHCP Server Manual Binding Window The fields that can be configured are described below: Parameter Pool Name Host Mask Hardware Address Description Enter the DHCP server pool name here. This name can be up to 32 characters long. Enter the DHCP host IPv4 address here. Enter the DHCP host network subnet mask here. Enter the DHCP host MAC address here. 61