D-Link DGS-1510 User Manual - Page 419

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide The fields that can be configured in the SNMP Host Settings section are described below: Parameter Host IPv4 Address Description Enter the IPv4 address of the SNMP host here. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. The fields that can be configured in the Log Server section are described below: Parameter Host IPv4 Address Description Enter the IPv4 address of the syslog server here. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. The uplink ports join all surveillance VLANs since they forward surveillance traffic to other switches. It is recommended to connect uplink ports to the other switches because the discovery process is disabled on these ports. The fields that can be configured in the Uplink Port Settings section are described below: Parameter Unit From Port / To Port Description Select the unit ID of the Switch in the stack that will be used here. Select the uplink port range that will be used here. Click the Apply button to accept the changes made. Click the Delete button to remove the specified entry. Surveillance Log This window is used to display the surveillance log. To view the following window, click Surveillance Log, as shown below: Figure 14-20 Surveillance Log Window Click the Refresh button to refresh the information displayed in the table. 408