D-Link DGS-1510 User Manual - Page 188

DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide Static ARP This window is used to view and configure the static ARP settings. To view the following window, click L3 Features > ARP > Static ARP, as shown below: Figure 6-2 Static ARP Window The fields that can be configured are described below: Parameter IP Address Hardware Address Description Enter the IP address that will be associated with the MAC address here. Enter the MAC address that will be associated with the IP address here. Click the Apply button to accept the changes made. Click the Edit button to re-configure the specific entry. Click the Delete button to remove the specific entry. Enter a page number and click the Go button to navigate to a specific page when multiple pages exist. Proxy ARP This window is used to view and configure the proxy ARP settings. The Proxy ARP feature of the Switch will allow the Switch to reply to ARP requests destined for another device by faking its identity (IP and MAC Address) as the original ARP responder. Therefore, the Switch can then route packets to the intended destination without configuring static routing or a default gateway. The host, usually a Layer 3 switch, will respond to packets destined for another device. To view the following window, click L3 Features > ARP > Proxy ARP, as shown below: Figure 6-3 Proxy ARP Window The fields that can be configured are described below: Parameter Proxy ARP State Description Select to enable or disable the proxy ARP state here. 177