D-Link DGS-1510 User Manual - Page 321
ARP Inspection Log, IP Source Guard, IP Source Guard Port Settings
View all D-Link DGS-1510 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 321 highlights
DGS-1510 Series Gigabit Ethernet SmartPro Switch Web UI Reference Guide ARP Inspection Log This window is used to view, configure, and clear the ARP inspection log information. To view the following window, click Security > IMPB > IPv4 > Dynamic ARP Inspection > ARP Inspection Log, as shown below: Figure 9-49 ARP Inspection Log Window The fields that can be configured are described below: Parameter Log Buffer Description Enter the log's buffer value used here. This value must be between 1 and 1024. By default, this value is 32. Click the Apply button to accept the changes made. Click the Clear Log button to clear the log. IP Source Guard IP Source Guard Port Settings This window is used to view and configure the IP source guard port settings. To view the following window, click Security > IMPB > IPv4 > IP Source Guard > IP Source Guard Port Settings, as shown below: Figure 9-50 IP Source Guard Port Settings Window The fields that can be configured are described below: Parameter Unit From Port / To Port State Validation Description Select the switch unit that will be used for this configuration here. Select the appropriate port range used for the configuration here. Select to enable or disable the IP source guard's state for the specified port(s) here. Select the validation method used here. Options to choose from are IP and IP-MAC. Selecting IP means that the IP address of the received packets will be checked. Selecting IP-MAC means that the IP address and the MAC address of the received packets will be checked. Click the Apply button to accept the changes made. 310