HP Xw460c HP Integrated Lights-Out 2 User Guide for Firmware 1.75 and 1.77 - Page 102
Virtual serial port and remote serial console, Using a Linux session
View all HP Xw460c manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Character value 0x1F 0xFF Description Down pointer Shaded block Mapped equivalent v blank space Using a Linux session You can run an iLO 2 virtual serial port on a Linux system, if the system is configured to present a terminal session on the serial port. This feature enables you to use a remote logging service. You can remotely log on to the serial port and redirect output to a log file. Any system messages directed to the serial port are logged remotely. Some Linux text modes are actually graphical modes and cannot be displayed using iLO 2 Text console. For example, SLES terminals are text on graphics mode even though they appear to be text-based it does not display correctly in iLO 2 Text Console. If you attempt to use an unsupported mode, iLO 2 Text Console display a message indicating that the server is using a graphical mode. Some keyboard character sequences required by Linux in the text mode might not be passed through to iLO 2 Text Console. For example, the alt + tab keyboard combination might be intercepted by the client. To work around these issues, configure a hot key for the keyboard combination. For more information, see "Remote Console hot keys (on page 86)." Virtual serial port and remote serial console The management processor contains serial-port hardware that can replace the physical serial port on the server's motherboard. Using an electronic switch, the iLO 2 firmware disconnects the server's physical serial port and commands its own serial-port hardware to connect. The iLO 2 serial-port hardware establishes a connection between the server and the management processor network. The firmware encapsulates the characters sent by the server to the serial port into network packets and sends the network packets to the remote serial console applet or application (the application may be a telnet or SSH client). Characters sent by the remote applet or application are encapsulated into network packets and sent to the iLO 2 firmware, which then extracts the characters and feeds them to the server. The iLO 2 remote serial console provides a bi-directional serial communication path between the remote user and the server. Using the iLO 2 remote serial console, the remote user is able to perform operations such as interacting with the server POST sequence and operating system boot sequence; establishing a login session with the Using iLO 2 102