HP Xw460c HP Integrated Lights-Out 2 User Guide for Firmware 1.75 and 1.77 - Page 129

o Manual-If your facility prefers static IP address assignment, you can individually change each of the server blade iLO 2 ports and interconnect module management ports to unique static addresses or use EBIPA to assign a range of static IP addresses to individual server blade and interconnect module bays. o EBIPA-When a server blade or interconnect module is inserted into a bay that has EBIPA enabled, that management port will get the specific static IP address from the Onboard Administrator if that device is configured for DHCP. The administrator sets an independent range for server blade bays and interconnect module bays using the Onboard Administrator EBIPA setup wizard. The first address in a range is assigned to the first bay and then consecutive bays through the range. For example, if you set the server bay EBIPA range to 16.100.226.21 to 16.100.226.36, the iLO 2 in device bay #1 will be assigned 16.100.226.21 and the iLO 2 in device bay #12 is assigned 16.100.226.32. If you set the interconnect bay EBIPA range to 16.200.139.51 to 16.209.139.58, the interconnect module management port in interconnect bay #1 will be assigned 16.200.139.51 and the interconnect module management port in interconnect bay #7 will be assigned 16.200.139.57. To enable EBIPA settings for the server bays in this enclosure, select Enable Enclosure Bay IP Addressing for Server Bay iLO 2 Processors and then enter the following information. Field Beginning Address Possible value where ### ranges from 0 to 255 Description Beginning IP address for the device or interconnect bays. Click the arrow next to the Beginning Address field, and click Update List to update the Device List or Interconnect List. Using iLO 2 129