HP Xw460c HP Integrated Lights-Out 2 User Guide for Firmware 1.75 and 1.77 - Page 68

the iLO 2 interface, CLI, RIBCL or other management feature. If the server is powered down because of the operating system, physical power button presses, or other methods, the alert is generated and sent. • ALERT_SERVER_RESET occurs when the iLO 2 management processor is used to perform a cold boot or warm boot of the host system. This alert is also sent when the iLO 2 management processor detects the host system is in reset because of events unknown to the management processor. Certain operating system behavior or actions can cause this type of event to be detected, and the alert transmitted. • ALERT_ILLEGAL_LOGIN is an SNMP alert transmitted when a connection is attempted using an invalid username and password. This alert is transmitted regardless of connection type; web interface, serial port, telnet, SSH, or RIBCL. • ALERT_LOGS_FULL is an SNMP alert transmitted when the iLO 2 Event Log is full and an attempt to log a new event occurs. • ALERT_SELFTEST_FAILURE is an SNMP alert transmitted when iLO 2 detects an error in any one of the monitored internal components. If an error is detected an SNMP alert is transmitted. • ALERT_SECURITY_ENABLED alert is transmitted when the iLO 2 management processor detects a change in the Security Override Switch to enabled. • ALERT_SECURITY_DISABLED alert is transmitted when the iLO 2 management processor detects a change in the Security Override Switch to disabled. • ALERT_HOST_GENERATED alert is generated when the iLO 2 management processor was asked to transmit a Host (SNMP passthrough) alert and the management processor was unable to transmit the original SNMP alert. iLO 2 attempts to transmit this generic alert in order to notify the SNMP management console that an alert intended to be transmitted from the host system was not transmitted. Configuring Insight Manager integration The Insight Manager Web Agent URL (DNS name or IP address) sets the browser destination of the Insight Agent link on iLO 2 pages. Typically, this link is the IP address or DNS name of the management agent running on the host server operating system. Enter the IP address of the host server. The protocol (https://) and port number (:2381) are automatically added to the IP address or DNS name to allow access to the Insight Management Web Agents from iLO 2. If the Insight Manager Web Agent URL is set through another method (for example, CPQLOCFG), click the refresh button of your browser to display the updated URL. The Level of Data Returned setting controls the content of an anonymous discovery message received by iLO 2. The information returned is used for Insight Manager HTTP identification requests. The following options are available: • Enabled (default) allows Insight Manager to associate the management processor with the host server and provides sufficient data to allow integration with HP SIM. • Disabled prevents iLO 2 from responding to the HP SIM requests. • View XML Reply enables you to examine the data returned at the settings. View the response that will be returned to Insight Manager when it requests Management Processor identification using this link. Configuring iLO 2 68