Netgear DC112A User Manual - Page 154
Factory Settings
View all Netgear DC112A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 154 highlights
AirCard Smart Cradle Factory Settings You can return the AirCard Smart Cradle its factory settings. Use the end of a paper clip or a similar object to press and hold the Reset button on the back of the AirCard Smart Cradle for at least seven seconds. The AirCard Smart Cradle resets and cradle returns to the factory configuration settings shown in the following table. When the AirCard Smart Cradle restarts, all LEDs on the front panel light. Table 3. Factory default settings Feature Smart Cradle login Internet connection Local network (LAN) Firewall Default behavior User login URL netgear.cradle or http://192.168.100.1 User name (case-sensitive) admin Login password (case-sensitive) password WAN MAC address Use default hardware address WAN MTU size 1500 Port speed AutoSensing LAN IP http://192.168.100.1 Subnet mask 255.255.255.0 DHCP server Enabled DHCP range 192.168.100.2 to 192.168.100.254 Time zone Pacific time DHCP starting IP address 192.168.100.2 DHCP ending IP address 192.168.100.254 DMZ Disabled Time zone GMT for WW except NA and GR, GMT+1 for GR, GMT-8 for NA, GMT+10 for AU Time zone adjusted for daylight saving time Disabled SNMP Disabled Inbound (communications coming Disabled (except traffic on port 80, the HTTP port) in from the Internet) Outbound (communications going Enabled (all) out to the Internet) Source MAC filtering Disabled Supplemental Information 154