Netgear DC112A User Manual - Page 33
Set Up an IPv6 Pass Through Internet Connection, Static IP Address, Use DHCP Server, Auto Config
View all Netgear DC112A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
The screen adjusts: AirCard Smart Cradle The cradle automatically detects the information in the Router's IPv6 Address on LAN field. This field shows the IPv6 address that is acquired for the cradle's LAN interface. The number after the slash (/) is the length of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no address is acquired, the field displays Not Available. 6. Select an IP Address Assignment radio button: • Auto. Your cradle uses any remote relay gateway that is available on the Internet. This is the default setting. • Static IP Address. Enter the static IPv4 address of the remote relay gateway. Your IPv6 ISP usually provides this address. 7. Select an IP Address Assignment radio button: • Use DHCP Server. This method passes more information to LAN devices but some IPv6 systems might not support the DHCv6 client function. • Auto Config. This is the default setting. This setting specifies how the cradle assigns IPv6 addresses to the devices on your home network (the LAN). 8. (Optional) Select the Use This Interface ID check box and specify the interface ID to be used for the IPv6 address of the cradle's LAN interface. If you do not specify an ID here, the cradle generates one automatically from its MAC address. 9. Click the Apply button. Your settings are saved. Set Up an IPv6 Pass Through Internet Connection In pass-through mode, the cradle works as a Layer 2 Ethernet switch with two ports (LAN and WAN Ethernet ports) for IPv6 packets. The cradle does not process any IPv6 header packets. Internet Setup 33