Netgear DC112A User Manual - Page 75
admin, password, ADVANCED > Setup > LAN Setup, IP Address, IP Subnet Mask, RIP Direction, Out
View all Netgear DC112A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 75 highlights
AirCard Smart Cradle 3. Enter the cradle user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Setup > LAN Setup. 5. In the IP Address field, type the IP address. 6. In the IP Subnet Mask, type the subnet mask of the cradle. The IP address and subnet mask identify which addresses are local to a specific device and which must be reached through a gateway or cradle. 7. Change the RIP settings. Router Information Protocol (RIP) allows the cradle to exchange routing information with other routers. a. In the RIP Direction list, select one of the following: • Both. The cradle broadcasts its routing table periodically and incorporates information that it receives. • Out Only. The cradle broadcasts its routing table periodically. • In Only. The cradle incorporates the RIP information that it receives. b. In the RIP Version list, select one of the following: • Disabled. This is the default setting. • RIP-1. This format is universally supported. It is adequate for most networks, unless your network setup is unusual. • RIP-2. This format carries more information. Both RIP-2B and RIP-2M send the routing data in RIP-2 format. RIP-2B uses subnet broadcasting. RIP-2M uses multicasting. 8. Click the Apply button. Network Settings 75