Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 112

GS716Tv2 and GS724Tv3 Software Administration Manual • Interface: Select Interface from the menu, enter the interface ID in g1, g2... format, then, click Go. If any entries with learned on that interface exist, they are displayed. Figure 3-30 Table 3-28. MAC Address Table Fields Field Description VLAN ID MAC Address Specifies the VLAN ID on which the IGMP Snooping Querier is administratively enabled and for which VLAN exists in the VLAN database. A unicast MAC address for which the switch has forwarding and/or filtering information. The format is a six-byte MAC address with each byte separated by colons. For example, 00:0F:89:AB:CD:EF. Interface The port where this address was learned. In other words, this field shows the port through which the MAC address can be reached. Status The status of this entry. The possible values are: • Static: The entry was added when a static MAC filter was defined. • Learned: The entry was learned by observing the source MAC addresses of incoming traffic, and is currently in use. • Management: The system MAC address, which is identified with interface c1. 3. Click Clear to clear Dynamic MAC Addresses in the table. 3-48 v1.0, July 2009 Configuring Switching Information