Netgear GS716Tv2 GS716Tv2/GS724Tv3 Software Admin Manual - Page 82
Table, 10. Spanning Tree Switch Configuration/Status Fields, Configuring Switching Information
View all Netgear GS716Tv2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
GS716Tv2 and GS724Tv3 Software Administration Manual Figure 3-11 Table 3-10. Spanning Tree Switch Configuration/Status Fields Field Spanning Tree State STP Operation Mode Configuration Name Configuration Revision Level Configuration Digest Key BPDU Flooding Bridge Identifier Description Enables or disables Spanning Tree operation on the switch. Specifies the Force Protocol Version parameter for the switch. Options are: • STP (Spanning Tree Protocol): IEEE 802.1d • RSTP (Rapid Spanning Tree Protocol): IEEE 802.1w • MSTP (Multiple Spanning Tree Protocol): IEEE 802.1s Name used to identify the configuration currently being used. It may be up to 32 alphanumeric characters. Number used to identify the configuration currently being used. The values allowed are between 0 and 65535. The default value is 0. Number used to identify the configuration currently being used. Enables or disables BPDU Flooding. When this feature is enabled, BPDU packets arriving at this port are flooded to other ports if STP is disabled. The bridge identifier for the CST. It is made up using the bridge priority and the base MAC address of the bridge. 3-18 v1.0, July 2009 Configuring Switching Information